Due Covid-19 Pandemic, We can't Accept Project Outside NCR at the moment!

How to add an ONVIF IP camera to a Hikvision DVR

How to add an ONVIF IP camera to a Hikvision DVR

A Hikvision DVR can record and manage analog cameras, however, some of these devices have a hybrid technology and can work with both, analog and IP cameras.

Depending on the model you have, could be possible to mix different types of cameras. In this article, I explain how to add an ONVIF IP camera to a Hikvision DVR. The setup is easier than you think, just keep reading...

 

The Hybrid Hikvision DVR 


A hybrid Hikvision DVR supports analog cameras with different technologies such as HD-TVI, AHD and CVBS and also the IP cameras which are ONVIF compliant.

If you have a model like the Hikvision DS-7208HGHI Turbo Hybrid DVR you are ready to get your IP camera working as long as it is compatible with ONVIF. 

 

When purchasing a DVR, I suggest you always to look for a Hybrid one because that allows you to choose different types of cameras and mix all of them in the same surveillance system. Hybrid DVRs are also known as HVRs.

 

DVR connection diagram


Before starting the DVR setup, it's important to understand how everything is connected and addressed. Take a look at the following diagram.

The diagram shows a laptop with the IP Address 192.168.2.10 an IP camera which has the IP 192.168.2.107 and the Hikvision DVR with its IP 192.168.2.140.

As you can see in the diagram, the DVR has analog cameras connected directly to its ports, but the IP camera is connected to the router and can be added to the DVR through the local network as long as everything is setup correctly.

How to add the IP camera to the DVR
The setup process is very simple, to connect the IP camera to the DVR it's necessary to have the all the devices using the same IP network range, which means they are part of the same network as shown in the previous diagram.

Setup the DVR IP address
Obviously, your network IP range is probably different than mine, but the idea is the same, as you can see, my network range is 192.168.2.x where the X is a number between 1 and 254. Just use your IPs following the same principle.

Assuming your IP camera already has the correct IP address, let's start the DVR setup. Using the mouse, right-click in the screen and click "Menu"

Click the "Configuration" icon

Check if the date and time are correct to have the system recording correctly and then click the "Network" button to open the next screen.

Check if the IP is correct according to your network range.

The picture below shows my Hikvision DVR with the IP 192.168.2.140 and with the subnet mask 255.255.255.0. The gateway is 192.168.2.1 and represents the router address (Just in case the DVR should be visible from the Internet).

 

Setup the IP camera


Now it's time to setup the IP camera.

You just need to open the camera menu as shown in the picture below.

In the DVR camera management screen, click on "Custom Adding".

In the next screen just add your IP camera information as shown below:

As you can see in the picture above, I have included the following information:

IP camera Address: 192.168.2.107

Protocol: ONVIF

Management port: 8899

Transfer protocol: Auto

Username: admin

Password:

 

Enter all the information and click the "Add button"

Your ONVIF IP camera is now added to the Hikvision DVR and you can check the status by looking at the icon.